vishay general semiconductor zgl41-100 thru zgl41-200a document number 88409 26-jun-06 www.vishay.com 1 surface mount glass passivated power voltage-regulating diodes features ? plastic melf package ? ideal for automated placement ? glass passivated chip junction ? low zener impedance ? low regulation factor ? typical i r less than 0.1 a ? meets msl level 1, per j-std-020c, lf max peak of 250 c ? solder dip 260 c, 40 seconds ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for general purpose regulation and protection applications. mechanical data case: do-213ab (gl41) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002b and jesd22-b102d e3 suffix for commercial grade polarity: red band denotes zener diode and positive (cathode) do-213ab (gl41) major ratings and characteristics v z 100 v to 200 v p d 1.0 w i r 1.0 a t j max. 150 c maximum ratings (t a = 25 c unless otherwise noted) parameter symbol value unit operating junction and storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88409 26-jun-06 vishay general semiconductor zgl41-100 thru zgl41-200a note: (1) standard voltage tolerance is 10 %, suffix a = 5 % (2) surge current is a non-repetitive, 8.3 ms pulse width square wave or equi valent sine-wave superimposed on i zt per jedec method (3) maximum steady state power dissipation is 1.0 watt at t t = 75 c ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) type nominal zener vol tag e at i zt (1) v z (v) test current i zt (ma) maximum zener dynamic impedance maximum dc reverse leakage current at v r maximum surge current (2) i rm (madc) max. instantaneous forward vol tag e at 200 ma v f (v) z zt at i zt z zk at i zk i r v r ( ) ( ) (ma) (a) (v) zgl41-100 100 3.7 250 3100 0.25 1.0 76.0 10.0 1.5 zgl41-110 110 3.4 300 4000 0.25 1.0 83.6 9.1 1.5 zgl41-120 120 3.1 380 4500 0.25 1.0 91.2 8.3 1.5 zgl41-130 130 2.9 450 5000 0.25 1.0 98.8 7.7 1.5 zgl41-140 140 2.7 525 5500 0.25 1.0 106.4 7.1 1.5 zgl41-150 150 2.5 600 6000 0.25 1.0 114.0 6.7 1.5 zgl41-160 160 2.3 700 6500 0.25 1.0 121.6 6.3 1.5 zgl41-170 170 2.2 800 6750 0.25 1.0 129.2 5.9 1.5 zgl41-180 180 2.1 900 7000 0.25 1.0 136.9 5.6 1.5 zgl41-190 190 2.0 1050 7500 0.25 1.0 144.4 5.3 1.5 zgl41-200 200 1.9 1200 8000 0.25 1.0 152.0 5.0 1.5 ordering information preferred p/n unit weight (g) preferred package code base quantity delivery mode zgl41-100-e3/96 0.134 96 1500 7" diameter plastic tape & reel zgl41-100-e3/97 0.134 97 5000 13" diameter plastic tape & reel figure 1. maximum continuous power dissipation 0 0.25 0.5 0.75 1.0 75 25 50 100 125 150 175 60 hz resisti v e or ind u cti v e load p.c.b. mo u nted on 0.31 x 0.31 x 0.0 8 " ( 8 x 8 x 2 mm) copper pad areas a v erage po w er dissipation ( w ) terminals temperat u re (c) figure 2. typical zener impedance 10 1 0.1 100 1000 10000 10 z z - dynamic zener impedance ( ) i zt - zener test c u rrent (ma) v z = 200 v v z = 1 8 0 v v z = 150 v v z = 120 v v z = 100 v
document number 88409 26-jun-06 www.vishay.com 3 zgl41-100 thru zgl41-200a vishay general semiconductor package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reverse characteristics 0.01 0.1 1 10 0.4 0.6 0. 8 1 1.2 1.4 1.6 t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) instantaneo u sre v erse c u rrent ( a) 0.01 0.1 1 10 40 20 0 percent of rated zener v oltage ( % ) 60 8 0 100 t j = 100 c t j = 25 c figure 5. steady state power derating curve figure 6. typical zener voltage 1 8 0 160 140 120 100 8 0 200 220 100 130 110 140 150 160 170 1 8 0 190 200 120 v z - temperat u re coefficient (m v /c) v z - zener v oltage ( v ) tested at rated i zt 0.1 1 10 100 150 200 250 v z - zener v oltage ( v ) i zt - test zener c u rrent (ma) d1 = 0.105 0.095 (2.67) (2.41) 0.205 (5.2) 0.1 8 5 (4.7) + 0 - 0.00 8 (0.20) d2 0.022 (0.56) 0.01 8 (0.46) 0.022 (0.56) 0.01 8 (0.46) do-213ab (gl41) solderable e n ds 1st band d2 = d1 1st b and denotes type and positi v e end (cathode) 0.13 8 max (3.5) max 0.049 mi n (1.25) mi n 0.11 8 mi n (3.0) mi n 0.23 8 (6.0) ref mountin g pad layout
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
